Clinch Clip - Spring Clip Tools Machines - Locknail Machine

Clinch Clips - Spring Anchor Clips - Locknails

Clinch Clip - Spring Clip Tools Machines

Applications - Features - Benefits

Fasteners Used

• Upholstered Furniture, Bedding, Autoseats, Cages with hinge applications, Wire Forms For Concrete Pipe
• Square Blade Clipping Tool. Tool forms clip in a round tube for hinge applications as well as gives tight, uniform appearance on fixed wire to wire fastening. For small gauge wire (10-14 gauge)

• Cages Applications Clipping Tool
• Angle Blade For tight connections of small gauge wire

• Construction, Impact Panels Applications
• Clipping Tool

• Animal Cages, Bird Feeders Applications Clipping Tool
• Thin Anvil For tight connections of small gauge wire with narrow grip (i.e., 1/2" x 1")

• Animal cages, Bird feeders w/1/2 in. grid
• Tool has thin and narrow anvil.
• Provides clipping access for small gauge wire on tight grids (i.e., 1/2" x 1/2").

• Machine includes: Clipping Head, Ejector Block, Control Box, Translator, Drive System, Air System, Pusher Arm, Sensor Assembly. End Exit Hold Down, Exit Cover are available
• Electric multi rail autofeed mechanism
• Low skill level 8,000 clip/hr operation
• Store and Transfer Rail set-up offline via RS232 port
• Graphically program rail set-up
• Ethernet connectivity, set-up and monitor machine from desktop
• Bar code scanner available to identify rail style and track inventory
• Chair, loveseats, sofa frame rail spring clip application

• Allows precision placement of spring anchor clips to chair rail (straight or curved) for uniform spring alignment and ride
• Coil fed anchor clip system
• Operator fed single piece operation
• For best results it is recommended that all clip be hammer closed after spring up

• Allows precision placement of spring anchor clips to chair rail (straight or curved) for uniform spring alignment and ride
• Coil fed anchor clip system
• Operator fed single piece operation
• For best results it is recommended that all clip be hammer closed after spring up

• Machine includes: Clipping Head, Ejector Block, Control Box, Translator, Drive System, Air System, Pusher Arm, Sensor Assembly. End Exit Hold Down, Exit Cover are available
• Electric multi rail autofeed mechanism
• Low skill level 8,000 clip/hr operation
• Store and Transfer Rail set-up offline via RS232 port
• Graphically program rail set-up
• Ethernet connectivity, set-up and monitor machine from desktop
• Bar code scanner available to identify rail style and track inventory

• Concertina Security Fence
• This clip tool combined with a stainless steel clip HR-CL-615430D will secure loops of concertine barbed wire
• Tool and clip have detent for slip resistance

• Security Fence, Razor Wire Applications Clipping Tool
• This clip tool combined with a stainless steel clip HR-62-645430 is specifically designed for securing loops of barbed tape wire

• Furniture

• Furniture, High loop sinuous w/reduced clearance
• Thin Anvil Furniture Applications Light Clipping Tool

• Automotive, Animal Cages W/Hinge Applications
• Square Blade Automotive Applications Light Clipping Tool

• Furniture
• Angle Blade Furniture Applications Light Clipping Tool

• Driving Power: 2,000 Magazine Capacity: 25 to 45 collated clips
• 25 to 45 Collated Clips Magazine Borderwire to Wire Spring Clipping Tool
• Clinching tool squeezes instead of folding the clip around wires
• In one step the driver blade cleanly picks up a clip from the magazine, places it around the wires and the driver and anvil form the clip into a tight strong wire bond

• Bedding- Rebuilders and Custom Size Units
• Angle Blade Bedding Applications Light Clipping Tool

• Bedding Applications Bedding, Flat Wire 6-8mm
• Light Clipping Tool

• Concrete Pipe Applications
• Square Blade Light Clipping Tool. Tool forms tube for hinge applications. For larger gauge wire (i.e., 6 to 6 gauge)

• Bedding Applications  Tool, Foundations, Non-Domestic
• Light Clipping Tool

• Bedding Applications  , Flat Wire 10mm
• Light Clipping Tool

• Lobster Traps Applications
• Light Clipping Tool Pinned side plates / nose won't get caught on grids. For applying clips to large grids.

• Lobster Traps, 3/4" clips only, 1 in. wide grids. For applying 3/4" clips to 1" wide x > 1" high grids
• Narrow Anvil 3/4 Clips Light Clipping Tool. Pinned side plates / nose won't get caught on grids.

• Lobster Traps. For applying 7/8" clips to 1" > wide x 1" high grids.
• Thin Anvil 7/8 Clips 1" Tall Grid Light Clipping Tool. Pinned side plates / nose won't get caught on grids

• For applying 3/4" clips to 1" wide x 1" high grids. Lobster Traps, 3/4" clips only, 1in. X 1in. grids.
• Thin and Narrow Blade and Anvil Light Clipping Tool. Pinned side plates / nose won't get caught on grids.

• Cages, Fencing
• Thin and Narrow Blade and Anvil Light Clipping Tool.

• Light Clipping Tool
• Bedding
• Concrete Pipe
• Gabions

HR-LN

Securing upholstery panels to the frame

• The LockNail™ system is a competitively priced upholstery panel nailing system allowing quick and easy applications of a hard galvanized steel fastener to cardboard or composite board upholstery panel. The system improves quality with accurate placement of nails and reduces panel failure by eliminating nail pop-thru in upholstery material. As the locknail is driven through the panel by a pneumatic “Stapler” three barbs pierce the material. The two smaller tabs are clinched like a staple securing the low profile head to the panel. The third larger tab is a strong thin ribbed nail available in 3/4" and 15/16" lengths. After this 'pre-nailing' padding and cover material are applied to the panel during the finishing operation. The panel can then be securely nailed to the furniture frame using a mallet or block of wood.

Spring Anchor Clip Stapler

• Weight: 4.7 lbs, 2.13 kilos
• Fastener Gauge: 16
• Fastener Range" 1/2 to 1-1/2
• Fastener Size Maximum: 1-1/2
• Fastener Size Minimum: 1/2
• Magazine Capacity: 168

• Low volume over the rail spring clip placement or applications using plywood back posts
• Ability to pre-insert OSK clip in to tool prior to stapling
• Magnetic nose holds OSK clip in place for precise alignment of staple legs over clip holes
• Attachment of other sinous spring clips to frame seat and back rails