| | | | | | | | | Air Tools - Air Nailers | Fasteners - Air Nails | | | | | Pneumatic Finish Nailers | Pneumatic Finish Nails | | | | | Finish Nailers and Finish Nails for Construction - Furniture - Industrial - Millwork | | | | | | |   | | | | Angled 15 Gauge DA Style Stick Finish Nails fit: | 15 Gauge Straight Stick Finish Nails fit: | | | | Angled 15 Gauge Stick Finish Nails fit: | Angled 16 Gauge Stick Finish Nails fit:N52FN-3 | | | | | | | | N62FN2KIT - Industrial 15-Gauge Oil-Free Angled Finish Nailer Kit | | | Click Item Number for Price
N62FN2KIT Sequential Trip | | Height | 11",295.4mm | | Length | 140",3573.53mm | | Width | 3",79.5mm | | Weight | 3.8 lbs, 1.72 kilos | | Driving Power | 400 | | Magazine Capacity | 130 | | Max. Operating Pressure | 120 | | Min. Operating Pressure | 70 | | Operating Pressure | 70-120 | | Power to Weight Ratio | 105 | | Thread Fitting Type | NPT | | Thread Size | 1/4 |
| - The industry’s lightest angled finish nailer in its class at 3.8 lbs.
- Oil-free engine requires no lubrication, leaves no oil stains on work
- Tool-free removable magazine for fast cleaning and jam clearing
- Adjustable depth control for quick countersinking adjustments
- Angled magazine for maximum maneuverability
- Bypass nail pusher simplifies loading to one easy step
- Molded rubber comfort grip designed to last longer
- Tool-free adjustable deflector conveniently directs exhaust
- Includes no-mar tip, 1,000 fasteners and carrying case
| - Interior finish and trim
- Exterior finish and trim
- Furniture
- Cabinet work
- Staircases
| | | | | | | | N52FN-2 16-Gauge Finish Nailer | | | | Click Item Number for Price 
| | Weight | 3.7 lbs, 1.68 kilos | | Driving Power | 330 | | Fastener Gauge | 15 | | Fastener Range | 1 to 2 | | Fastener Size Maximum | 2 | | Fastener Size Minimum | 1 | | Magazine Capacity | 130 |
| - Sequential trip
- Oil free engine requires no lubrication
- Tool free removable magazine
 | - Structural assembly, casings
- Medium duty finish nail structural assembly
| | | | | | | | SB-1664FN - Industrial 16-Gauge Straight Finish Nailer Kit | | | | Click Item Number for Price  
| | Height | 11-1/2",292.1mm | | Length | 11-1/4",285.75mm | | Width | 3",76.2mm | | Weight | 4 lbs, 1.81 kilos | | Driving Power | 300 | | Magazine Capacity | 100 | | Max. Operating Pressure | 100 | | Min. Operating Pressure | 70 | | Operating Pressure | 70-100 | | Power to Weight Ratio | 75 | | Thread Fitting Type | NPT | | Thread Size | 1/4 |
| - Aluminum housing for job site durability
- Quick release nose door for fast jam clearing
- Adjustable depth control for quick countersinking adjustments
- Rubber grip for comfort
- Adjustable deflector conveniently directs exhaust
- No-mar tip protects work surface
- Includes oil, 1,000 fasteners and carrying case
Finish Nails to fit:- Craftsman: 18431
- DeWalt: D51275K
- DuoFast: LFN748, D51275
- Hitachi: NT65A
- Porter Cable: FN250, FN250A
- Paslode: IM250 II & IM250F Trimpulse, 3250-F16
| - Interior finish and trim
- Exterior finish and trim
- Furniture
- Cabinet work
- Staircases
| | | | | | | | | | FN16250K-2 - Industrial 16 Gauge Oil-free Finish Nailer Kit | | | | Call for Price on this new item.  | New Item! Customer Service for Price Request | Height | 10-1/2",266.7mm | | Length | 12-3/8",314.33mm | | Width | 3",76.2mm | | Weight | 3.3 lbs, 1.5 kilos | | Driving Power | 290 Inch Pounds | | Magazine Capacity | 104 | | Operating Pressure | 70-120 PSI | | Power to Weight Ratio | 88 | | Thread Fitting Type | NPT | | Thread Size | 1/4" |
| - Oil-free engine requires no lubrication, leaves no oil stains on work
- Magnesium housing for job site durability and light weight
- Adjustable depth of drive for quick countersinking adjustments
- Ultra quiet rear exhaust directs air away from user
- Zero nail lock out prevents cycling when empty
- Open nose design for easy cleaning if a jam occurs
- Swept back work contacting foot improves visibility for precision nailing
- Removable no-mar tip protects even soft woods from damage
| - Interior finish and trim
- Exterior finish and trim
- Furniture
- Cabinet Work
- Staircases
| | | |
| | | | Air Tools - Air Nailers - Pneumatic Finish Nailers | Pneumatic Finish Nailers - Straight Magazine | | Click on Item for Your Price | Pneumatic Finish Nailer Description | Magazine Capacity | Weight per Tool (lbs) | | SB-1664FN | Sequential Trip, 16 Gauge 1" - 2 1/2" Finish Nailer, Straight Magazine | 100 | 4.0 | Pneumatic Finish Nailers - Angled Magazine | | Click on Item for Your Price | Pneumatic Finish Nailer Description | Magazine Capacity | Weight per Tool (lbs) | | N62FN-1 | Contact Trip, 15 Gauge 1" - 2 1/2" Finish Nailer, Angled Magazine | 100 | 3.8 | | N62FN-2 | Sequential Trip, 15 Gauge 1" - 2 1/2" Finish Nailer, Angled Magazine | 100 | 3.8 | | N62FN2KIT | Sequential Trip,15 Gauge 1"-2 1/2" Finish Nailer, Angled Mag., Kit Includes Carrying Case, 1000 Fasteners, No-Mar Tip | 100 | 3.8 | | N52FN-2 | Sequential Trip, 16 Gauge 1" - 2" Finish Nailer, Angled Magazine | 130 | 3.7 | | N52FN-3 | Trigger Fire, 16 Gauge 1" - 2" Finish Nailer, Angled Magazine | 130 | 3.7 | | Important - You and others working around you can be seriously injured by fastener driving tools if you do not follow the instructions provided on the tool and in the operations manual. Used properly, these tools provide easy, safe and efficient methods for driving nails, staples & rings. Contact Trip - best suited for high volume rapid fastening where exact placement of the fastener is not important. Sequential Trip - best suited when rapid fastening is not needed or when exact fastener placement is important. Trigger Operation - used when the work piece contact is not practical because of the specific operation performed by the fastener driving tool. Evaluate your application to determine the best trigger trip. | Stick Nailers - Paper Tape Collated | Stick Nailers - Plastic Collated | Stick Nailers - Wire Collated | Brad Nailers | Brads | Coil Nailers - Heavy & Extra Duty | Coil Nailers - Siding & Crating | Nails - Coil | Nails - Stick | | | Finish Nailers for Construction - Furniture - Industrial - Millwork Applications | | |
| | | | | | Air Nails - Pneumatic Finish Nails | | | Pneumatic Finish Nails for the following Pneumatic Finish Nailers: | | |
| Angled 15 Gauge Finish Nails fit: Stanley Bostitch: N59FN, N60FN, N62FN | | |
| Angled 16 Gauge Finish Nails fit: Stanley Bostitch: N50FN, N52FN | | |
| 15 Gauge Straight Stick Finish Nails fit: Stanley Bostitch Finish Nailers: SB-1664FN; Craftsman: 18431; DeWalt: D51275K; Duo Fast: LFN748, D51275K; Hitachi: NT65A; Porter Cable: FN250, FN250A; Paslode: IM250 II & IM250F, Trimpulse, 3250-F16 | | | | | | | Angled Magazine Stick Finish Nails - 15 Gauge Finish Nails | 1 Case Minimum | | Click on Item for Your Price | Finish Nail Length | Point | Finish | Qty per Box | Boxes per Case | Finish Nails Fit Stanley Bostitch Finish Nailers Below: | Est. Weight per Box (lbs) | Cases per Pallet | | FN1520 | 1-1/4 | Chisel | Galvanized | 3655 | 4 | N59FN, N60FN, N62FN | 5.69 | 80 | | FN1524 | 1-1/2 | Chisel | Galvanized | 3655 | 4 | N59FN, N60FN, N62FN | 6.76 | 80 | | FN1524ALM | 1-1/2 | Chisel | Aluminum | 3655 | 4 | N59FN, N60FN, N62FN | N/A | N/A | | FN1524CCGAL | 1-1/2 | Chisel | Galvanized | 3500 | 4 | N59FN, N60FN, N62FN | N/A | N/A | | FN1524SS | 1-1/2 | Chisel | Stainless | 3655 | 4 | N59FN, N60FN, N62FN | N/A | N/A | | FN1528 | 1-3/4 | Chisel | Galvanized | 3655 | 4 | N59FN, N60FN, N62FN | 7.85 | 80 | | FN1532 | 2 | Chisel | Galvanized | 3655 | 4 | N59FN, N60FN, N62FN | 8.87 | 68 | | FN1532ALM | 2 | Chisel | Aluminum | 3655 | 4 | N59FN, N60FN, N62FN | N/A | N/A | | FN1532CCGAL | 2 | Chisel | Galvanized | 3500 | 4 | N59FN, N60FN, N62FN | N/A | N/A | | FN1532SS | 2 | Chisel | Stainless | 3655 | 4 | N59FN, N60FN, N62FN | 8.87 | 68 | | FN1536 | 2-1/4 | Chisel | Galvanized | 3655 | 4 | N59FN, N60FN, N62FN | 10.02 | 54 | | FN1540 | 2-1/2 | Chisel | Galvanized | 3655 | 4 | N59FN, N60FN, N62FN | 11.04 | 54 | | FN1540-0592 | 2-1/2 | Chisel | Lt. Brown | 3655 | 4 | N59FN, N60FN, N62FN | 11.04 | 54 | | FN1540CCGAL | 2-1/2 | Chisel | Galvanized | 3500 | 4 | N59FN, N60FN, N62FN | 11.04 | 54 | | FN1540SS | 2-1/2 | Chisel | Stainless | 3655 | 4 | N59FN, N60FN, N62FN | 11.04 | 54 | | | Stick Nailers - Paper Tape Collated | Stick Nailers - Plastic Collated | Stick Nailers - Wire Collated | Brad Nailers | Brads | Coil Nailers - Heavy & Extra Duty | Coil Nailers - Siding & Crating | Nails - Coil | Nails - Stick | Order Online at DS Manco™ Packaging and Fastening Now | | | | | | | Angled Magazine Stick Finish Nails - 16 Gauge Finish Nails | 1 Case Minimum | | Click on Item for Your Price | Finish Nail Length | Point | Finish | Qty per Box | Boxes per Case | Finish Nails Fit Stanley Bostitch Finish Nailers Below: | Est. Weight per Box (lbs) | Cases per Pallet | | FN1616 | 1 | Chisel | Galvanized | 5000 | 4 | N50FN, N52FN | 4.92 | 128 | | FN1620 | 1 1/4 | Chisel | Galvanized | 5000 | 4 | N50FN, N52FN | 5.76 | 112 | | FN1624 | 1 1/2 | Chisel | Galvanized | 5000 | 4 | N50FN, N52FN | 6.92 | 80 | | FN1628 | 1 3/4 | Chisel | Galvanized | 5000 | 4 | N50FN, N52FN | 7.92 | 80 | | FN1632 | 2 |
|
